Roof rack NAVIS Ford Ranger flat aluminum black

Roof rack NAVIS Ford Ranger flat aluminum black

Roof rack Modular System NAVIS (From model year 2016+ (T7)

The NAVIS roof rack was developed as a modular system. The roof rack made from high quality aluminum

is not only very light, but also extremely rigid. The high load capacity of 300 kg is unique in this segment.

We have opted for airline mounts, so you can continue to use your fittings with our system.

The NAVIS builds so low that the overall height from the vehicle does not change compared to the original railing.

Attention:

The roof rack system is only suitable for double cab with original mounting options (roof rails) on the roof.

For vehicles without series roof rails, 8 holes must be drilled.

Features:

Load capacity 300 kg static 100 kg dynamic*.

Fuel consumption & wind noise Optimized by tube technology.

Extremely low body. Overall vehicle height does not change compared to the original railing**.

Lighting mounts in the front panel for all common LED bars

36 integrated airline mounting points

6 mounting points of the carrier mount to distribute the weight evenly on the roof.

Use of original mounting points (no drilling or flexing) - the carrier can be removed easily

Modular design - you can take your NAVIS roof rack with you when you change vehicles.

High quality powder coated aluminum 5052

5 years warranty

TÜV & vehicle manufacturer tested quality

Roof rack only 12,5 kg

Lashing points in the roof rack base

CAR SWAP - when changing vehicles you only need a new roof rack foot.

Designed for roof tents & awnings

* The dynamic load capacity is not the manufacturer's approval for the roof load.

  Do not exceed the roof load from the manufacturer. Static load indicates the load capacity when stationary. 

** For roof rack without railing and load. Slight deviations possible depending on vehicle type.

Tests and certificates: 

The roof racks have been tested by Mercedes-Benz for the X-Class and a manufacturer's approval has been granted.

In addition, the NAVIS has a TÜV test. Each individual roof rack is tested and calibrated in a special gauge before powder coating.

and measured in a special gauge before powder coating. After that, it is assembled for testing. This ensures

that each carrier fits. We drive countless kilometers - on & offroad, with & without load -

to offer you a perfectly matched roof rack for your vehicle. We do not build one-size-fits-all,

but test each mounting system until it is perfectly adapted to your vehicle and works well.

The roof rack has been tested for noise and strength on different vehicles for about 1500 km.

and strength tested. The conclusion is, through the round tube is the additional wind noise

minimal and does not disturb further. From 120-140 Km/h the wind noise becomes noticeably stronger with roof racks.

In exceptional cases, a louder wind noise or a roar may occur, often the reason is

often the reason is a tension of the carrier, because the vehicle and also the carrier have tolerances in the production.

In these cases, it usually helps to loosen the carrier again and build up tension-free.

If then still disturbing wind noise are, helps the installation of a spoiler or additional LED lamps.

Scope of delivery:

Navis basic carrier

Roof rack base

Mounting material and installation instructions

Spoiler